Loading... Please wait...
- Home
- Ladder Levelers
- Ladder Leveler - Permanent Mount Style by Levelok
Ladder Leveler - Permanent Mount Style by Levelok
Product Description
Level your ladder in less than five seconds!
The patented LeveLok® LL-STB-1 Leveler/Stabilizer has only two controls, and operating it is so easy,
it can be done with the touch of a toe.
This permanent mount style ladder leveler can stabilize virtually any ladder: aluminum or fiberglass, extension,
combination, articulating, double-sided step, or sectional. Installs easily and quickly to adapt to nearly any indoor
or outdoor situation, from stairwells to uneven terrain on job sites. Simple and easy to put together: attaches to
ladder rail with 3 mounting bolts, fender washers and nylon locking nuts.
LeveLok is the choice of major U.S. and Canadian utility companies.
Super heavy duty construction
6061-T6 Aluminum
Stainless steel locking system
Fully automatic safety lock
Only two controls -- operating is so easy, it can be done with the touch of a toe!
Extends a full 10"
Automatic back-up safety lock
Snap on / off polypropylene cap
Meets or exceeds OSHA/ANSI requirements up to and including type 1AA (375lbs) ladders
Each kit contains:
• 2 Ladder Levelers
• Installation Hardware
• Instruction Manual
• Template
Ergonomic Shapes
• Foot pedal snaps up for storage or down for leveling
• Curved shapes for ease of grip and leveling comfort
• Grooved surfaces of upper and lower pedals provide easy to grip surfaces
• Foot pedal can actually be snapped up and down with toe of shoe or boot\
Leveler Shoes
• These shoes are heavy duty, made of steel that swivels front to back and side to side
• Rubber tread secured with 3 extra-wide fasteners
• Triple plated pivoting foot with claw flips back for ice, snow, or gravel
• Large, heavy duty anti-skid rubber treads on claw-pivoting foot -- grips almost any surface
Quick and Simple Installation
• Place template on ladder rail
• Drill 3 holes using template as drill guide
• Slide leveler into holes
• Tighten locknuts
• Mounting bolts are pre-installed to prevent fumbling around with bolts
To Level -To set into position, hold the ladder with both hands and simply push the foot pedal down. The leg will extend in increments of 3/16 of an inch up
to 9-3/4". You'll hear the stainless steel ratchet's reassuring "click" with each increment. When the leg has been extended to the point where it
has firm footing, you're done!
The automatic safety lock instantly engages, thereby providing a back-up safety lock, preventing the possibility of accidental tripping of the locking mechanism. This is another unique and patented feature found only on Levelok Ladder Leveling Systems.
To Release - While the ladder is still in the rested position with both hands on ladder, simply pull the ladder rail with the extended leveler back toward you to remove the weight from the ladder leg. Then depress upper release lever with ball of foot or thumb and the spring tension will slowly retract the inner leg all the way up, until it stops against the bumpers. The ladder can now be relocated and leveled again. The Ladder Leveler (Permanent Mount Style) contains a pair of levelers which permanently mount to each leg of your ladder, hardware, template and instructions.
*Model LL-STB-1AL For most standard extension, combination and articulating ladders with a rail thickness between 1/8" and 3/8" thick. Not for sectional, wood or other types of ladders with thick or box beam rails. If you would like to order the LL-STB-1SL, which fits up to a 15/16" rail thickness, please call us to special order.
Standards Compliance - Meets all ANSI and OSHA requirements for ladders up to Type 1AA, 375 pound duty rating;
exceeds OSHA Directive 1-1.14 and ANSI A14.10 Standard for Type 1AA
Ladder Compatibility - Fits most aluminum and fiberglass, extension, combination, articulating, or sectional ladders.
Mounting Bolt Length - 7/8 inch
Installation Method - Attaches to ladder rail with 3 mounting bolts, fender washers and nylon locking nuts.
Locking System - Stainless steel, double-row ratchet teeth, precision cut for precise 3/16" incremental adjustments.
Safety Lock - Patented, fully automatic, stainless steel, anti-trip, back-up safety lock.
Weight per unit - Each individual ladder leveler weighs 5 lbs 2 oz.
Shipping Weight - 12 lbs. 1 oz. for each complete kit, including 2 levelers, hardware kit, template, etc.
Warranty - 12 months parts and labor for manufacturing defects.
Product Videos
-
levelok easy t... -
Levelok easy 3... -
Levelok Safety... -
Levelok LL-STB...The Levelok Permanent Mount Ladder Levelers help provide safet...
Warranty Information
Level your ladder in less than five seconds!
Operating this leveler is so easy,
it can be done with the touch of a toe.
This permanent mount style ladder leveler can stabilize virtually any ladder: aluminum or fiberglass, extension,
combination, articulating, double-sided step, or sectional. Installs easily and quickly to adapt to nearly any indoor
or outdoor situation, from stairwells to uneven terrain on job sites. Simple and easy to put together: attaches to
ladder rail with 3 mounting bolts, fender washers and nylon locking nuts.
LeveLok is the choice of major U.S. and Canadian utility companies.
- Super heavy duty construction
- 6061-T6 Aluminum
- Stainless steel locking system
- Fully automatic safety lock
- Only two controls -- operating is so easy, it can be done with the touch of a toe!
- Extends a full 10"
- Automatic back-up safety lock
- Snap on / off polypropylene cap
- Meets or exceeds OSHA/ANSI requirements up to and including type 1AA (375lbs) ladders
Each kit contains:
• 2 Ladder Levelers
• Installation Hardware
• Instruction Manual
• Template
Product Reviews
Previous | Showing reviews 11-20 of 20
-
Quality product
Posted by Dan on 8th Jul 2014
Great product. Should have bought these years ago. High quality and nicely made. No more using wood pieces to level the ladder.
-
is your neck worth it?
Posted by Jpk "Bmthr" on 8th Jul 2014
While they do add weight it is well worth it. Have installed them on all my ladders and have not taken a ladder ride since.
-
works very well.
Posted by Mikey "DVD Buff" on 8th Jul 2014
Easy installation, but it did require careful drilling into my aluminum ladder. Works very well. I like this better than the werner brand because two levelers are used. I don't have to swap them from side to side.
-
Easy to install - work well
Posted by Computer Tech on 8th Jul 2014
I added these to my 24 year old 16 foot aluminum extension ladder for the purpose of working on the high wall on the stairs inside my home. Took down wall paper and retextured wall. The adjustment worked well and made a safer ladder - I am all for safety. I did have to build a block to set on the lower step - they don't extend two stairs distance, but it was easy to use.
Installation went slick - comes with a drilling template.
It does add weight to my ladder, but that isn't a big problem. The feet are solid and easy to work with, the feet also have points on the edge that would allow you to more safely stick them into a slick surface such as ice.
Good Product.. -
Great ladder adjusters!
Posted by Martin J. Courtier on 8th Jul 2014
Great buy!! Well made and came as a pair! The action is so easy to operate. I plane to purchase another pair.
A++ -
Great, safe, easy!
Posted by X-rayLemi on 8th Jul 2014
Work great very sturdy. VERY easy to install. Very easy to use. Do not add signifigant weight to the ladder.
-
Sweet!
Posted by S. Kezios on 8th Jul 2014
A must have if you're serious about safety. When I think back at all the shimming I did with bricks and pieces of wood... This is a much better way to go. Easy to install, easy to use. Very strong, very reliable. How can you put a price on your own safety?
-
Great for stairs
Posted by M. Fineburg on 8th Jul 2014
This is a handy little addition to my ladder. It is Easy to adjust. The only downside is it is heavy, but then again it is heavy duty
-
levelok
Posted by Alice Oksa on 8th Jul 2014
My husband loves this. We live on hill and it is hard to use a ladder. This is nice to level out your ladder and you feel safer using a ladder.
-
A must HAVE for anyladder
Posted by Adam Orden "jawsurgeon" on 8th Jul 2014
I have used extension ladders for 40 years...this is the product that should be mandatory on EVERY extension ladder. After using it..I can't even believe that ladders are sold without it. I am a surgeon and the worst fracture of the face I ever took care of was a guy that fell off a ladder. It took me 30 years to buy these even after seeing that. How stupid.
First simple to install. ; The instructions were superb. Took less than 30 minutes to install both brackets.
The first time I used it I couldn't believe I ever used a ladder without these brackets..
Do me a favor..save your life and get these.
Previous | Showing reviews 11-20 of 20
